E-Collar
Radio controlled locking shock collar
I have made a short video clip about this collar at the IML convention in Chicago. If you would like to see it, send me an email. I will send you the Realmedia file. It is about 2 MB in size.
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of collar in photo = 130 mm, about 5.1 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Rigid Collar - with two loops
Closes with with secure locking cylinder. Provided with 2 loops at the sides
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of collar in photo = 110 mm, about 4.33 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Rigid Collar - two loops on top
Closes with with secure locking cylinder. Provided with two loops on the top
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 110 mm, about 4.33 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Rigid Collar - attachment points for 4 chains on top, 4 on bottom
Provided with 8 slots and removable pins for attaching chains. 4 slots and pins are on the top (shown in photo) and 4 are on the bottom. Closes with with secure locking cylinder
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 140mm, about 5.5 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Rigid Collar - Thin
This collar is not as thick as the standard collars, which decreases it's weight. Provided with two loops on the side
Closes with with small secure locking cylinder
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 110mm, about 4.33 inches. Other sizes available, see below.
Height = 5 layers x 8mm = 40 mm, or about 1.6 inches
See below for prices and ordering.
Rigid Collar - chain can be attached or removed
Chain atachable or removeable. (chain not included, customer to supply chain of any length)
Closes with with small secure locking cylinder
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 110mm, about 4.33 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Two Rigid Collars - connected with chain
Chain atachable or removeable from each collar. (chain not included, customer to supply chain of any length)
Collars close with with small secure locking cylinder
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Small collar:
Inside diameter of the collar in the photo = 110mm, about 4.33 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
Large collar :
Inside diameter of the collar in the photo = 130mm, about 5.10 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Rigid Collar - with ring
Provided with one steel ring
Closes with with small secure locking cylinder
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter = 115 mm
Outside diameter of the collar in the photo = 157 mm. Other sizes available, see below.
Height = 40 mm (about 1.6 inches)
Weigt about 1.2 kilogram
See below for prices and ordering.
Rigid Jail Collar - attaches to vertical bars of jail or cage
Fits around 3/4 inch diameter vertical bars
Lockable with bolt and padlock
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 140 mm, 5.5 inches. Other sizes available, see below.
Outside diameter = 210 mm, 8.3 inches
Height = 5 layers x 8mm = 40 mm, or about 1.6 inches
Weigt about 2.4 kg
See below for prices and ordering.
Rigid Collar - with removable pins for ataching up to 6 chains
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 110 mm, about 4.3 inches. Other sizes available, see below.
Outside diameter = 170 mm (6.7 inches)
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
Weigt = about 2 kg
See below for prices and ordering.
 
Prices and Sizes
Price for standard designs with 5 layers (40 mm height = about 1.57 inches): 320 EURO other currencies
Price for standard designs with 7 layers (56 mm height = about 2. inches ): 370 EURO other currencies
Price for the CageCollar in standard design and standardsize with 5 layers (40 mm height = about 1.57. inches ): 340 EURO other currencies
All collars are available in these standard inside diameters = 100, 110, 120, 130, 140 mm (150mm available too)
Custom designs are always welcome. Contact Martin with your ideas.
Shipping to the old European Union, USA and Canada included in price. Shipments can be made via FedEx.
Contact Martin for various payment options.
Email : Martin@RigidCuff.Com
Phone (Germany): 011 49 170 290 88 66
Phone (San Francisco) 1 - 415 - 200 - 4515
Eve Secured in Steel
Click HERE to see this collar used on our model Eve, available via straming video pay-per-view or DVD.
Martin's Rigid Cuffs
Click HERE to see Martin's gear in use, available via straming video pay-per-view or DVD.